Dutch

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
January 15, 2019 at 8:26 pm in reply to: MB w212 v6. Misfiring cylinder 1; OK after restart #27589
Dutch
Participant
Solution found. Sparkplug cylinder one did not reach combustion chamber due to contamination of thread which made torque wrench click prematurely.Thread cleaned. Sparkplug in right position. Engine runs like clockwork.
December 12, 2018 at 9:28 pm in reply to: MB w212 v6. Misfiring cylinder 1; OK after restart #21796
Dutch
Participant
Hello Importech, thank you for responding. So far no one has come up with this suggestion. It does not seem to account for the holding back every run after the engine has heated up, though. Or do you think the problems are unrelated?
December 12, 2018 at 9:24 pm in reply to: MB w212 v6. Misfiring cylinder 1; OK after restart #21795
Dutch
Participant
Hello Alex, thank you for responding. Only after the car has been sitting for a while. Usually for some ten hours or so.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Join the Community

This Website is the ultimate resource for Advanced DIY Auto Repair with the specific purpose of preventing “parts changing”- that is- changing parts on a guess because of a lack of understanding on how to test if a part is actually faulty. This is accomplished by using a methodical, scientific approach to accurately confirm a diagnosis before attempting a repair. Subscribe here and you’ll stop firing the “parts cannon” by changing O2 sensors, plugs, and wires to try and fix your check engine light and instead use professional-level advanced Auto diagnostics and repair with tools and equipment available to any home mechanic.