Need a little help with MAP and fuel trim

Tagged: forte, Kia, Rough Idle, stalls

This topic has 1 reply, 1 voice, and was last updated 2 years, 7 months ago by rickcioppa.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
September 20, 2022 at 4:29 pm #288624
rickcioppa
Participant
Torque Pro Data

Here is my data.
Unfortunately my fuel trim looks like it doesn’t go up as I increase rpm.
Also it runs really rough at 1000rpm, see attached.
Any ideas
2010 Kia Forte ex 2.0
September 20, 2022 at 8:54 pm #288626
rickcioppa
Participant
https://docs.google.com/spreadsheets/d/1ys31dz-p6SvDx1RHl4kIZ3ua5FKdZrmq/edit?usp=sharing&ouid=115157670925374658942&rtpof=true&sd=true

Can’t figure this out. I added so graphs on bottom of spread sheet.
Any help would be appreciated.
Thanks
- This reply was modified 2 years, 7 months ago by rickcioppa.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Join the Community

This Website is the ultimate resource for Advanced DIY Auto Repair with the specific purpose of preventing “parts changing”- that is- changing parts on a guess because of a lack of understanding on how to test if a part is actually faulty. This is accomplished by using a methodical, scientific approach to accurately confirm a diagnosis before attempting a repair. Subscribe here and you’ll stop firing the “parts cannon” by changing O2 sensors, plugs, and wires to try and fix your check engine light and instead use professional-level advanced Auto diagnostics and repair with tools and equipment available to any home mechanic.