Looking to improve my scanner and scope combination

Home Forums Welcome and Introductions Looking to improve my scanner and scope combination

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #313029
    Seele7
    Participant

      I seem to attract the weird and less obvious problems like a magnet and have learned that more info in trying to solve them is helpful but still no cigar..
      Had a Hantek 1008c for several years but interface with the software was a real puppy maker.
      Finally did something to it and lost power from it in January.
      Spoiled by 8ch a little I picked up a MiSig VATO 2004 to replace it. Trouble is the save function sucks so my work around is screenshots and recording. I’m mostly using it for reference and verification purposes.
      Still decided a Pico 2204 was needed too so bought just a scope and no accessories as I had leads all manner of adapters and plugs already.
      Also have ThinkCar 689BT and an OTOfix 481 for bidirectional scanners.
      Here in hopes of finding a few clues and 🫰🫰a point in the right direction when the weird inevitably hits.

    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.