Catalyst Monitor not ready

This topic has 1 reply, 2 voices, and was last updated 4 years, 7 months ago by tdawalker.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
March 7, 2020 at 7:21 pm #157810
sheets1211
Participant
Hello all, I have a 2004 Solara SLE 2.4, 4 cylinder that is having a problem passing the California Smog test due to the Catalyst monitor not being ready. I previously had a P2238 code and replaced the AFR sensor then proceeded replace the spark plugs, o2 and MAF sensor, all Denso. I also replaced the thermostat and battery and drove for around 600 miles. If this helps the long term fuel trim at idle 670 rpms is around 7.8, the AFR is 9.7:1 and all other monitors are ready with no codes or pending codes. Is this an indication of a failed catalytic converter or is there another direction I should be taking? Any help is truly appreciated.
May 26, 2020 at 4:56 pm #201113
tdawalker
Participant
Mileage is not what sets the catalyst ready.It has to get a proper drive cycle. Google the drive cycle for your car and go through the procedure.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Join the Community

This Website is the ultimate resource for Advanced DIY Auto Repair with the specific purpose of preventing “parts changing”- that is- changing parts on a guess because of a lack of understanding on how to test if a part is actually faulty. This is accomplished by using a methodical, scientific approach to accurately confirm a diagnosis before attempting a repair. Subscribe here and you’ll stop firing the “parts cannon” by changing O2 sensors, plugs, and wires to try and fix your check engine light and instead use professional-level advanced Auto diagnostics and repair with tools and equipment available to any home mechanic.